Construction

Shanthi timber has a variety of products that equip the construction industry from formwork to finish for the best results and has a good number of variety and stocks of special plywoods in a wide range of sizes.

SHUTTERING PLYWOOD

Shanthi timber has a superior Film Faced Densified Shuttering plywood capable of a high level performance for varied uses in the construction industry like building bridges, tunnels, heavy industries power plant, defence structures and other concrete structures. The filmface on the plywood used is a natural saturating grade kraft paper impregnated with phenolic resin. This film is used as an overlay for shuttering plywood. Which makes it suitable for concrete shuttering and truck flooring.
Advantages :

Superior nailing, screw holding properties.
Higher load bearing capacity.
Substantial cost saving since it can be used multiple times for shuttering applications.
It improves construction speed and reduces manpower requirements.

Applications of Shuttering Plywood :

In construction industry for walls, columns, slabs, beams etc.
Truck body manufacturing

Sizes available :

Size	Thickness
8*4	12mm, 18mm
10*4	12mm
10*5	12mm

Specifications:

Test Details	Standards Values	Observed Values
PHYSICAL TESTING
DIMENSIONS Length Width Thickness	2140mm. (+6mm) 920mm. (+3mm) 12mm. (+/-5%)	2442mm. 1222mm. 11.74mm.
Edge Straightness (%)	0.2% Maximum	0.05%
Square ness (%)	0.2% Maximum	0.10%
Average moisture content	15% Maximum	9%
Visual Appearance	Free From Visual Defects	Free From Visual Defects
PROPERTY TESTINGS
Resistance to Water	After 8 hours. in 100°C + 2°C Pwater 6 Cyclic – “Pass Standard”, “Excellent” & “Poor”	No Delamination Observed
Static Bending test
Modulus of Rupture (In Dry State) Along the grain Across the grain	Ind. 45 N/mm ² Avg. 50 N/mm ² Ind. 27 N/mm ² Avg. 30 N/mm ²	Ind. 51.4 N/mm ² Avg. 50.9 N/mm ² Ind. 39.4 N/mm ² Avg. 41.9 N/mm ²
Modulus of Elasticity (In Dry State) Along the grain Across the grain	Ind. 6700 N/mm ² Avg. 7500 N/mm ² Ind. 3600 N/mm ² Avg. 4000 N/mm ²	Ind. 7942.5 N/mm ² Avg. 8434.6 N/mm ² Ind. 4469.6 N/mm ² Avg. 4364.9 N/mm ²
Wet Bending Test
Modulus of Rupture (In Dry State) Along the grain Across the grain	Ind. 22 N/mm ² Avg. 25 N/mm ² Ind. 13 N/mm ² Avg. 15 N/mm ²	Ind. 26.9 N/mm ² Avg. 28.6 N/mm ² Ind. 17.4 N/mm ² Avg. 18.9 N/mm ²
Modulus of Elasticity (In Dry State) Along the grain Across the grain	Ind. 3400 N/mm ² Avg. 3750 N/mm ² Ind. 1800 N/mm ² Avg. 2000 N/mm ²	Ind. 4102 N/mm ² Avg. 4092 N/mm ² Ind. 2264 N/mm ² Avg. 2394 N/mm ²
Adhesion of Plies	Pass Standard	Pass Standard
Mycological	Pass Standard	Pass Standard
Tensile Sterngth Along the grain Across the grain Sum Of Two Directions	42.0 N/mm ² 25.0 N/mm ² 67.0 N/mm ²	48.8 N/mm ² 29.6 N/mm ² 78.2 N/mm ²
Retention Of Presevative	12kg/m ²	12.40kg/m ²

Srl No	CL. No	Tests	Tests As Per Specification	Results Obtained
1	4	TYPE	CS/CSC/CSFF	CSFF
2	7	I) NOMINAL THICKNESS mm I) TOLARANCE ON THICKNESS	12.0 11.90	5%
	7	II)TOLARANCE ON LENGTH	+6/-0MM
4		I)WIDTH mm	1220	1222
	7	II)TOLARANCE ON WIDTH	+3/-0MM
5	7	SQUARE MESS%	0.2	0.03
6	7	EDGE STRAIGHTNESS%	0.2	0.07
7	8	WORKMANSHIP AND FINISH	SATISFACTORY	SATISFACTORY
8	10.1.1	MOISTURE CONTENT %	5-15	7-8
9	10.1.2	GLUE SHARE STRENGTH IN DRY STATE, N I) AVERAGE II) MINIMUM INDIVIDUAL III) ADHESION OF PLIES	1350 1100 PASS STANDARD	1450 1200 MNP
10	10.1.3	RESISTANCE TO WATER ( AT BOILING FOR 72HRS),N I) AVERAGE II) MINIMUM INDIVIDUAL III) ADHESION OF PLIES	1000 800 PASS STANDARD	1250 1060 MNP
11	10.1.7	RESISTANCE TO MICRO- ORGANISM KGS IV) AVERAGE V) MINIMUM INDIVIDUAL VI) ADHESION OF PLIES	1000 800 PASS STANDARD	1270 995 MNPP
12	10.1.8	MODULUS OF ELASTICITY, MIN N/mn2 DIRECTION PARALLEL TO THE GRAIN DIRECTIO FACE VENEER DIRECTION PERPENDICULAR TO THE GRAIN DIRECTION FACE VENEER	AVERAGE 7500 MIN IND. 6700 AVERAGE 4000 MIN IND. 3600	8100 7600 5560 4715
13	10.14	PLASTIC COATING OR WITH SUITABLE OVERLAY	SHALL NOT SHOW ANY SOFTENING, CHECKING, CRACKING OR DETERIORATION PF THE SURFACE LAER	STATISFACTORY
14	10.14	RENTENTATION OF PRESERVATIVE CHEMICAL,MIN	12KG/MM3	14KG/MM3
15	10.1.5	TENSILE STRENGHT N/MM2 I) PARALLEL TO THE FACE GRAIN II)PERPENDICULAR TO THE FACE GRAIN III)SUM OF THE TENSILE STRENGHT	32.50 22.5 60.0	45.05 40.02 85.09

SILVER OAK WOOD

Shanthi timber provides the best quality of Silver Oak Planks, Runners & Reapers which are sourced from western ghats of southern india in order to ensure utmost standards of quality.

Features:

Wood Type: Sliver Oak Wood.
Time and cost effective processing
Suitable for site use and staking with supporting timber.
Water & weather resistant.
Higher nail holding capacity.
Reliable: material with precisely defined strenth and quality.
100% natural construction material.
Cost effective companed to its substitute products.
Long life span for shuttering uses.

Specifications & Applications:

Runners
Specification		Applications
Inches	Millimeters (Finishing size)	Applications
2*3	44.45*69.85	>>Used for column Box >>Used for form work >>Used for making circular column >>Used in wall Shuttering
4*2	95.25*44.4	>>Used for column Box >>Used for form work >>Used for making circular column >>Used in wall Shuttering >>Used for beam span base support
4*3	95.25*69.85	>>Used for form work >>Used for beam span base support >>Used for slab support

Planks
Specification		Applications
Inches	Millimeters (Finishing size)	Applications
31.5 41.5	69.8538.1 101.638.1	>>Used in building Framework >>Circular Column >>Used for beam span base support >>Used for making circular column >>Used in wall Shuttering
		>>Used for form work >>Used for beam span base support
7*1.5	177.8*38.1
8*1.5	203.2*38.1
9*1.5	228.6*38.1
10*1.5	254*38.1
12*1.5	304.8*38.1

Reapers
Specification		Applications
Inches	Millimeters (Finishing size)	Applications
3*1	69.85*25.4	>>Used in movie sets support >>Used in advertising banner support
2*1	50.8*25.4

Shuttering Silver Frame

Shuttering Silver Frame
Specification
Width
1feet	(3×1.5)
1.5feet	(3×1.5)
2feet	(2×3) (4×2) (3×1.5)
4feet	(2×3) (4×2) (3×1.5)